تقرير رقم #101 — أُرسل في 2026-08-09 06:39:04
| No | الملاحظة | الحالة |
|---|---|---|
| 1 | water leak on laser mark 2 machine | خطر منخفض |
| الفرن | الكتلة المستلمة (طن) | المستهلك (طن) | المعدن المضاف (طن) | الكتلة عند نهاية الوردية (طن) | ملاحظات |
|---|---|---|---|---|---|
| HA
min: 28T
|
0.00 | 0.00 | 0.00 | 0.00 | — |
| HC
min: 24T
|
25.00 | 9.60 | 0.00 | 15.40 | — |
| SWM1 | 23.00 | 0.00 | 10.60 | 33.60 | — |
| SWM2 | 0.00 | 0.00 | 0.00 | 0.00 | — |
| المرحلة | الحالة | التعليقات |
|---|---|---|
| الاستلام | جيدة | — |
| التسليم | جيدة | — |
| رقم الماكينة | الحالة | نوع القالب | NDT سليم | رفض HC و FC | رفض NDT | الإجمالي | نسبة الرفض % | نسبة رفض H&F % | نسبة رفض NDT % | ملاحظات |
|---|---|---|---|---|---|---|---|---|---|---|
| 4 | تعمل | cv98-20 | 0 | 0 | 0 | 0 | 0.0% | 0.0% | 0.0% | — |
| 5 | تعمل | cv41-22 | 0 | 0 | 0 | 0 | 0.0% | 0.0% | 0.0% | — |
| 6 | تعمل | smx201-22 | 0 | 0 | 0 | 0 | 0.0% | 0.0% | 0.0% | — |
| 14 | تعمل | 640-16" | 0 | 0 | 0 | 0 | 0.0% | 0.0% | 0.0% | — |
| 15 | تعمل | 640-17 | 0 | 0 | 0 | 0 | 0.0% | 0.0% | 0.0% | — |
| 16 | تعمل | 640-16" | 0 | 0 | 0 | 0 | 0.0% | 0.0% | 0.0% | — |
| إجمالي الإنتاج | 0 | — | — | — | — | |||||
| إجمالي الرفض | 0 | 0% | 0% | 0% | — | |||||
| الماكينة | العطل | وقت التوقف (دقيقة) | الإجراء المتخذ | الإجراء المعلق | المسؤول | الحالة | إشعار Odoo |
|---|---|---|---|---|---|---|---|
| forklift d1 | ac not working | 45 دقيقة | inform | ac compressor need replace | maintenance team | مفتوح | — |
| موديل القالب | الحالة | ملاحظات |
|---|---|---|
| cv62 | مكتمل | — |
Maintenance Manager asked to give the forklift for service to check the AC and do the needful to repair it, but it was not done. Also, they could not remove the AC compressor, and this job made 2 machines stop. We were delayed in metal because of this, so I asked them to fix it back, take it back, complete the taping , and restart the machine. Tried to start the 7th machine in casting, but because the ladles are not holding the temperature, we cannot fill them 3 times. At the moment, we can fill them only 2 times. Forklifts are in bad condition. Every day, one forklift breaks down. They need to do a full service properly to avoid daily stoppages. I have spoken with all outsourced workers in the Foundry not to lift any wheels from the Rejection, HC, or FC areas. The operator will do this job. Today and the last 2 days ,It assigned to Sultan so he lifted the wheels for the full day.