Report #112 โ Submitted 2026-08-18 07:11:12
| No | Observation | Status |
|---|---|---|
| โ No observations recorded โ | ||
| Furnace | Mass Received (Ton) | Consumed (Ton) | Metal Added (Ton) | Mass End of Shift (Ton) | Remarks |
|---|---|---|---|---|---|
| HA
min: 28T
|
0.00 | 0.00 | 0.00 | 0.00 | โ |
| HC
min: 24T
|
22.00 โ Below minimum
|
13.50 | 8.00 | 16.50 | at this styel of work will naver get high level of metal till we add reject wheels + chips at the same time |
| SWM1 | 25.60 | 8.00 | 14.40 | 32.00 | idex stopped and we add reject wheels |
| SWM2 | 0.00 | 0.00 | 0.00 | 0.00 | โ |
| Stage | Condition | Comments |
|---|---|---|
| Received | Good | โ |
| Hand Over | Good | โ |
| M/C No. | Status | Mold Type | NDT OK | HC & FC Reject | NDT Reject | Total | Rejection % | H&F Rej % | NDT Rej % | Remarks |
|---|---|---|---|---|---|---|---|---|---|---|
| 4 | Running | 640-17" | 97 | 6 | 5 | 108 | 10.2% | 5.6% | 4.6% | more flash in this die from the bast 5 days till today not solve as Die shop team need tools not available |
| 5 | Running | CA90-24" | 62 | 6 | 5 | 73 | 15.1% | 8.2% | 6.9% | โ |
| 6 | Running | CV98-20" | 78 | 5 | 3 | 86 | 9.3% | 5.8% | 3.5% | โ |
| 7 | Running | SMX201-24" | 66 | 66 | 4 | 136 | 51.5% | 48.5% | 2.9% | โ |
| 14 | Running | 640-16"-m2 | 42 | 6 | 1 | 49 | 14.3% | 12.2% | 2.0% | โ |
| 14 | Running | 640-16"-m2 | 26 | 4 | 12 | 42 | 38.1% | 9.5% | 28.6% | removed and fix other one |
| 15 | Running | 640-15"-5H | 80 | 7 | 15 | 102 | 21.6% | 6.9% | 14.7% | โ |
| 16 | Running | 640-17" | 100 | 5 | 2 | 107 | 6.5% | 4.7% | 1.9% | โ |
| TOTAL PRODUCTION | 703 | โ | โ | โ | โ | |||||
| TOTAL REJECTION | 152 | 21.6% | 14.9% | 6.7% | โ | |||||
| ๐ฝ Machines Received from Previous Shift: | 7 | ๐ผ Machines Handed Over: | 7 |
| M/C | Issue | DownTime (min) | Action Taken | Pending Action | Responsible | Status | Odoo Notification |
|---|---|---|---|---|---|---|---|
| โ No breakdowns recorded โ | |||||||
| Die Model | Status | Remarks |
|---|---|---|
| CV93-22 | In Progress | full service done - remaining change date only |